This is the time many folks will start experience software update as Apple has officially released the iOS 13 alongside the iPhone 11 series. You should know that updating to the latest version will provide more stable, more secure and highly optimized. However, that’s not a guarantee that a software update doesn’t have any ish or would only render a positive outcome. There is some problem that accompanies software update especially on the iOS 13. Below we will be showing you the step on how to fix the Apple logo and black screen after updating to iOS 13. So if you have landed on this page while searching for a possible solution to fix any software problem on your iPhone, then read carefully and follow the troubleshooting steps accordingly.

iPhone keeps restarting

Related:

iPhone keeps restarting 1: Force restart your Apple iPhone.

This is the common solution to fix any iPhone or iOS issues. So if your iPhone is stuck in an infinite boot loop and couldn’t get past the Apple logo or it’s showing a black screen after the iOS 13 update. A force restart could do the magic. You can force restart your iPhone using different method depending on the models. Those using iPhone 8, 8 Plus or later, follow the steps below.

Step 1: Press and quickly release the Volume Up button.
Step 2: Press and quickly release the Volume Down button.
Step 3: Finally press and hold the Power button until the Apple logo appears.

Those using the iPhone 7, 7 plus or earlier should follow the steps below.

Step 1: Press and hold the Power button and Home button simultaneously until the device shuts down and reboots.
Step 2: Now when the Apple logo appears, release both the Power and Home buttons.
If your device bootup, you should carry out the second and third method to fix your iPhone. However, if it gets stuck on the Apple logo or black screen again, move to the fourth or fifth method.

READ  How To Request Desktop Site in Safari On iPhone And iPad

iPhone keeps restarting 2: Install pending updates on your Apple iPhone.

It has been said earlier that installing pending apps update will improve the device and performance and also fix any rogue on the phone. So make sure that all the apps are up to date. Remember you just upgraded to the iOS 13 and some of the apps that run on the previous iOS version might have become unstable and may affect other systems function.

Step 1: On the home screen, tap on the App Store to open the Apple Store application.
Step 2: Scroll down to the bottom of the screen then tap Updates. A list of Apps with the pending update will now appear on the screen.
Step 3: Tap the Update button next to the app name to install and update the individual app.
Step 4: To update all pending Apps, tap Update All button on the upper-right side of the screen.

After the update, reboot your iPhone to apply the recent software changes and to refresh the device memory.

iPhone keeps restarting 3: Reset all settings on your iPhone.

The update to iOS 13 might have overridden some of your system settings automatically, thereby causing some conflict on your device. To fix or clear this, you will have to reset all settings on your iPhone. Doing so will fix some of the problems but will wipe all customized settings including auto-update overrides that triggered the system functions to glitch. Also, this method does not affect any saved information on the internal memory so you don’t need to back up files. Follow the steps below to reset your iPhone.

Step 1: On your iPhone home screen, tap on Settings
Step 2: Tap General
Step 3: Next scroll down to and tap on Reset.
Step 4: Choose the option to Reset all settings
Step 5: Now enter your device passcode when asked to continue.
Step 6: Now tap to confirm that you want to reset your iPhone.

After the reset, your iPhone will restart automatically. All the features disabled will have to be re-enabled again.

iPhone keeps restarting 4: Restore iPhone in recovery mode via iTunes.

Restoring your iPhone from the previous backup may be all that your device needs to work fine again. To perform this type of reset, you will need a Windows or Mac computer with the latest version of the iTunes app installed.  Remember, this process will delete all data saved on your iPhone storage, so it’s recommended that you backup your important files and data before restoring your device. To restore your iPhone, follow the method below.

Step 1: On your PC, open iTunes
Step 2: Now connect your iPhone device to the computer using the original USB cable while pressing and holding down the Home button.
Step 3: You should release the Home button when the Connect to iTunes screen appears.
Step 4: Now iTunes will prompt you with a message saying that it has detected your iOS device in recovery mode and that you can restore your device. To restore tap on Device name button to initiate recovery mode restore through iTunes.

READ  How to take screenshots on windows 10

If you are using Apple iPhone without a home button like the iPhone X, iPhone XS, iPhone 11, etc, you should follow the steps below to enter recovery mode.

Step 1: Connect your iPhone to the computer using the USB/Lightning cable.
Step 2: When connected, open iTunes on your computer.
Step 3: On your iOS device, press and quickly release the Volume Up button.
Step 4: Next, press and hold the Power button until the Recovery Mode screen (Connect to iTunes screen) appears.

Finally, you should follow the rest on-screen instructions to restore your device in iTunes. The restore process normally takes about 15 minutes to complete. Be patient and don’t disconnect your iPhone from the computer unless the restore process is finished.

iPhone keeps restarting 5: Put your iPhone in DFU mode and repair iOS via iTunes.

This is the last and only solution. This is the only solution to deal with major software issues like a corrupted operating system. Performing a DFU mode restore will put your device in a state that allows iTunes to access and sync with your iOS device without activating the boot loader. This process could also result in permanent data loss. That been said, you should also back up your file and data before proceeding.

Warning: Make sure your iPhone is not affected by any physical damage.
You should examine the iOS device and be sure the screen is not broken and it’s not affected by water or any liquid substance.

Those using iPhone 8, 8 plus, X and later should follow this method to enter DFU mode.

Step 1: You should connect your iPhone to the computer using the original USB cable or Lightning cable.
Step 2: Open iTunes on the computer.
Step 3: Turn your iPhone off as you normally do if it’s On.
Step 4: Press and quickly release the Volume Down button and finally, press and hold the Side/Power button until the screen turns black.
Step 5: When your iPhone turn black, press and hold the Volume Down button while you keep pressing the Side/Power button.
Step 6: Let go of the Side/Power button after 5 seconds but keep pressing the Volume Down button until your iPhone appears in iTunes.
Step 7: When you see iPhone in iTunes, let go of the Volume Down button. Your iPhone is already running in DFU mode and is all set for updating, downgrading, or restoring through iTunes.

READ  How To Allow Android Notifications On PC With Microsoft’s Your Phone

Those using iPhone 7 should follow this step.

Step 1: You should connect your iPhone to the computer using the original USB cable or Lightning cable.
Step 2: Open iTunes on the computer.
Step 3: Turn your iPhone off of it’s on
Step 4: Press and hold down the Power (Sleep/Wake) and Volume Down buttons simultaneously for 8 seconds.
Step 5: Release the Power (Sleep/Wake) button but keep holding down the Volume Down button until iTunes prompts a message this message: “iTunes has detected an iPhone in recovery mode.”
Step 6: Release the Volume Down button if you see the message.

Now your iPhone screen will become completely black. That shows that you have successfully entered DFU mode. However if the screen doesn’t turn black or it shows some text or logo, you will have to start all over again. Those using iPhone 6s or earlier should follow the steps below to enter DFU mode:

Step 1: You should connect your iPhone to the computer using the original USB cable or Lightning cable.
Step 2: Open iTunes on the computer.
Step 3: Turn your iPhone off if it’s on.
Step 4: Now press and hold down the Power (Sleep/Wake) and Home buttons simultaneously for about 8 seconds
Step 5: Next release the Power (Sleep/Wake) button but keep holding down the Home button until you see the iTunes message saying that it has detected an iPhone in recovery mode.
Step 6: Release the home button if you see that message.

You should see that your iPhone is completely black which is an indication that you have successfully entered DFU mode. If it doesn’t turn black, you will have to start all over again.

iPhone continues to restart, get stuck on Apple logo or black screen?

If after following the method above and you still see a black screen or your iPhone keeps restarting itself, then it’s time to seek for third party iOS repair and recovery tools. There is other software just like iTunes that is a program to fix major iOS issues. You can download those tools on your window PC or Mac. Just pick the most trusted that is those with good user review online, download and follow the instructions on the website to fix your iOS device. If you can’t do it yourself, then contact Apple support team for further assistance or you can visit Apple genius bar for them to help you look at the device.

We just hope you find this article helpful. Use the comments box to let us know which method works for you.

LEAVE A REPLY

Please enter your comment!
Please enter your name here